1. MMC Electronics.
With variable speed pre-selection, smooth start-up, safety brake and overload protection the MMC electronics minimise
working stress and adapt machine performance to
the working material. |
2. FastFix saw blade changing system.
Rapid blade changes with a
convenient saw blade changing system that saves you time and money. |
3. Convenient operation.
The guard release is integrated in the two-stage switch and can be operated by both right and left-handers. The same applies
for the safety switch-on lock. |
4. Dust extraction.
The KAPEX is fitted with an
extraction connector and an
efficient chip deflector funnel: the chips are extracted directly where they are produced. |
5. Settings accurate to the millimetre.
Fine adjuster operated from the front, for precise cutting angles. Make complex cuts in no time at all. |
6. Precision grooving.
Cut
accurate grooves with the stepless trenching depth adjuster: simply
actuate the lever, set the trenching depth with a single turn and start
working... Intelligent. |
7. Secure workpiece support surface.
The
large sliding quick-release fences allow the accurate positioning of
workpieces in their 'original wall position' and the attachment of
self-manufactured positioning supports. |
8. Precision dual-line laser.
Irrespective of whether you
position
the workpiece from the left or right, the laser lines will always show
the exact width of the cut and make your work easier as a result. |
9. Robust and stable.
The KAPEX was designed for tough industrial applications. The large magnesium diecast base with rubber feet provides
maximum stability. |
10. Easy-to-read scales.
The easy-to-read scales are
abrasion-resistant, the
pointer can also be adjusted.
The rotary base has a 60°
range and is adjusted via the convenient clamp lever. |
11. Easy transportation.
Transport
safety device, clamp, cable holder, well designed hand grips and 21.5
kg in weight - the KAPEX is ideal for mobile applications. |
12. Bevel included.
Transfer interior and exterior angles precisely from the workpiece to your KAPEX using the bevel. |
13. Intelligent base height.
The KAPEX saw base is the
same height as the SYSTAINER SYS 1, which can be used to support long workpieces when working on the floor. |
14. 120 mm cutting depth.
The
unique special cutting position on the KAPEX allows you to cut strip
material with a maximum height of 120 mm quickly, safely and accurately. |
15. Space-saving precision design.
The
innovative twin-column guide holds the saw blade in position with even
greater accuracy and excludes com-ponents protruding from the rear. |
16. Rapid clamping.
The
tilt angle is easy to adjust from the front. Simply detach the
quick-release clamp, set the angle and lock - it couldn't
be easier... |
17. No dangerous
obstacles.
The cable holder keeps your workplace tidy and eliminates dangerous obstacles when you
transport the machine. |
|
.jpg){kind=small}
.gif){kind=small}
